Horizontal Machining Center

MDH100S Horizontal Machining Center

MDH100S is a horizontal machining center for multi-face milling, boring, drilling, reaming and tapping in one setup.

Worktable size (L × W)
1,000 × 1,000 mm
X/Y/Z axis travel
1,400 / 1,100 / 1,000 mm
Maximum spindle speed
8,000 r/min standard / 12,000 r/min motor spindle or 4,000 r/min gear-driven spindle optional
Number of pallets
2
MDH100S Horizontal Machining Center — official exact-model source image

Technical Specifications

SpecificationValue
Capacity & workpiece
Worktable size (L × W)1,000 × 1,000 mm
Table typeIT (standard) / BRT (optional)
Maximum table load2,000 kg
Tooling
Number of pallets2
Tool magazine capacity40 tools
Travel & guideways
X/Y/Z axis travel1,400 / 1,100 / 1,000 mm
Spindle
Maximum spindle speed8,000 r/min standard / 12,000 r/min motor spindle or 4,000 r/min gear-driven spindle optional
Spindle motor power25 kW continuous / 30 kW for 30 min (standard spindle)

Equipment configuration

Standard Configuration

  • FANUC 31i-B CNC control
  • 8,000 rpm BT50 motor spindle (25 kW continuous / 30 kW for 30 minutes)
  • Spindle oil cooling
  • 40-tool chain magazine with automatic tool changer
  • Dual-side auger chip conveyors
  • Fully enclosed machine guarding
  • Automatic spindle lubrication
  • IT rotary table with 1° indexing over 360°
  • Rigid tapping
  • Foundation anchor bolts and leveling pads
  • Hollow ball-screw cooling system
  • Workpiece coolant system
  • Tool kit, toolbox and supplied technical documentation
  • USB, DNC and embedded RJ45 Ethernet
  • Dual-pallet automatic pallet changer
  • Electrical cabinet and heat exchanger
  • Machine hydraulic system
  • Machine work light and three-color status light
  • Automatic grease lubrication
  • Safety door interlock
  • Spindle air curtain and spindle taper air blast
  • M30 automatic power-off function

Optional Configuration

  • 12,000 rpm BT50 motor spindle (25/30 kW)
  • 8,000 or 12,000 rpm high-torque BT50 motor spindle (25/45 kW)
  • 4,000 rpm BT50 gear-driven spindle (22/26 or 30/37 kW)
  • BRT CNC rotary table with 0.001° indexing and simultaneous four-axis machining
  • Worktable with up to three oil, air or water circuits for automatic fixture clamping
  • Thick T-slot worktable (7 slots, 18 mm wide, 125 mm spacing)
  • 220 V AC electrical cabinet air conditioner
  • 60-tool single-chain or 80/120-tool dual-chain magazine
  • Heidenhain X/Y/Z linear scales for full closed-loop control
  • In-zone Metrol drill-breakage detector
  • Magazine-mounted breakage detector for long, slender tools
  • Renishaw OMP60 or WP60M automatic workpiece probe
  • Worktable washdown water gun and air blow gun options
  • Through-spindle coolant with a 2 MPa or 7 MPa high-pressure unit
  • Overhead spray coolant system with separate pump
  • Elevating chip conveyor and chip cart (hinged-belt, scraper or magnetic scraper type)
  • Mist collector with full enclosure option
  • Tool life management system
  • Automatic tool-damage recovery with pallet change and cycle restart
  • G37 automatic tool length measurement
  • ARTIS tool monitoring system
  • Balluff tool identification system
  • English-language controller manual

Application Industries

  • Multi-face milling, boring, drilling, reaming and tapping in one setup.

DIRECT SALES CONTACT

Discuss MDH100S with our sales team

Send your workpiece material, drawing, required operations, accuracy target, destination and preferred CNC system for a scoped quotation.