مركز تشغيل أفقي

MDH100S مركز تشغيل أفقي

MDH100S: تفريز وتجويف وثقب وتوسيع ولولبة متعددة الأوجه في تثبيت واحد.

مقاس طاولة العمل (الطول×العرض)
1,000 × 1,000 mm
مشوار المحاور X/Y/Z
1,400 / 1,100 / 1,000 mm
أقصى سرعة للمغزل
8,000 r/min standard / 12,000 r/min motor spindle or 4,000 r/min gear-driven spindle optional
عدد المنصات
2
MDH100S Horizontal Machining Center — official exact-model source image

المواصفات الفنية

المواصفةالقيمة
مواصفات إضافية
مقاس طاولة العمل (الطول×العرض)1,000 × 1,000 mm
عدد المنصات2
نوع الطاولةIT (standard) / BRT (optional)
أقصى حمولة للطاولة2,000 kg
مشوار المحاور X/Y/Z1,400 / 1,100 / 1,000 mm
أقصى سرعة للمغزل8,000 r/min standard / 12,000 r/min motor spindle or 4,000 r/min gear-driven spindle optional
قدرة محرك المغزل25 kW continuous / 30 kW for 30 min (standard spindle)
سعة مخزن الأدوات40 tools

تجهيزات الماكينة

التجهيز القياسي

  • FANUC 31i-B CNC control
  • 8,000 rpm BT50 motor spindle (25 kW continuous / 30 kW for 30 minutes)
  • Spindle oil cooling
  • 40-tool chain magazine with automatic tool changer
  • Dual-side auger chip conveyors
  • Fully enclosed machine guarding
  • Automatic spindle lubrication
  • IT rotary table with 1° indexing over 360°
  • Rigid tapping
  • Foundation anchor bolts and leveling pads
  • Hollow ball-screw cooling system
  • Workpiece coolant system
  • Tool kit, toolbox and supplied technical documentation
  • USB, DNC and embedded RJ45 Ethernet
  • Dual-pallet automatic pallet changer
  • Electrical cabinet and heat exchanger
  • Machine hydraulic system
  • Machine work light and three-color status light
  • Automatic grease lubrication
  • Safety door interlock
  • Spindle air curtain and spindle taper air blast
  • M30 automatic power-off function

التجهيز الاختياري

  • 12,000 rpm BT50 motor spindle (25/30 kW)
  • 8,000 or 12,000 rpm high-torque BT50 motor spindle (25/45 kW)
  • 4,000 rpm BT50 gear-driven spindle (22/26 or 30/37 kW)
  • BRT CNC rotary table with 0.001° indexing and simultaneous four-axis machining
  • Worktable with up to three oil, air or water circuits for automatic fixture clamping
  • Thick T-slot worktable (7 slots, 18 mm wide, 125 mm spacing)
  • 220 V AC electrical cabinet air conditioner
  • 60-tool single-chain or 80/120-tool dual-chain magazine
  • Heidenhain X/Y/Z linear scales for full closed-loop control
  • In-zone Metrol drill-breakage detector
  • Magazine-mounted breakage detector for long, slender tools
  • Renishaw OMP60 or WP60M automatic workpiece probe
  • Worktable washdown water gun and air blow gun options
  • Through-spindle coolant with a 2 MPa or 7 MPa high-pressure unit
  • Overhead spray coolant system with separate pump
  • Elevating chip conveyor and chip cart (hinged-belt, scraper or magnetic scraper type)
  • Mist collector with full enclosure option
  • Tool life management system
  • Automatic tool-damage recovery with pallet change and cycle restart
  • G37 automatic tool length measurement
  • ARTIS tool monitoring system
  • Balluff tool identification system
  • English-language controller manual

الصناعات التطبيقية

  • تفريز وتجويف وثقب وتوسيع ولولبة متعددة الأوجه في تثبيت واحد.

اتصال مباشر بالمبيعات

ناقش MDH100S مع فريق المبيعات

أرسل مادة قطعة العمل والرسم والعمليات والدقة والوجهة ونظام CNC المفضل لإعداد عرض سعر محدد النطاق.