Горизонтальный обрабатывающий центр
MDH100S Горизонтальный обрабатывающий центр
MDH100S: Многостороннее фрезерование, растачивание, сверление, развертывание и нарезание резьбы за один установ.
- Размер стола (Д×Ш)
- 1,000 × 1,000 mm
- Ход осей X/Y/Z
- 1,400 / 1,100 / 1,000 mm
- Макс. частота вращения шпинделя
- 8,000 r/min standard / 12,000 r/min motor spindle or 4,000 r/min gear-driven spindle optional
- Количество паллет
- 2

Технические характеристики
| Параметр | Значение |
|---|---|
| Дополнительные характеристики | |
| Размер стола (Д×Ш) | 1,000 × 1,000 mm |
| Количество паллет | 2 |
| Тип стола | IT (standard) / BRT (optional) |
| Макс. нагрузка на стол | 2,000 kg |
| Ход осей X/Y/Z | 1,400 / 1,100 / 1,000 mm |
| Макс. частота вращения шпинделя | 8,000 r/min standard / 12,000 r/min motor spindle or 4,000 r/min gear-driven spindle optional |
| Мощность двигателя шпинделя | 25 kW continuous / 30 kW for 30 min (standard spindle) |
| Вместимость инструментального магазина | 40 tools |
Комплектация
Стандартная комплектация
- FANUC 31i-B CNC control
- 8,000 rpm BT50 motor spindle (25 kW continuous / 30 kW for 30 minutes)
- Spindle oil cooling
- 40-tool chain magazine with automatic tool changer
- Dual-side auger chip conveyors
- Fully enclosed machine guarding
- Automatic spindle lubrication
- IT rotary table with 1° indexing over 360°
- Rigid tapping
- Foundation anchor bolts and leveling pads
- Hollow ball-screw cooling system
- Workpiece coolant system
- Tool kit, toolbox and supplied technical documentation
- USB, DNC and embedded RJ45 Ethernet
- Dual-pallet automatic pallet changer
- Electrical cabinet and heat exchanger
- Machine hydraulic system
- Machine work light and three-color status light
- Automatic grease lubrication
- Safety door interlock
- Spindle air curtain and spindle taper air blast
- M30 automatic power-off function
Опции
- 12,000 rpm BT50 motor spindle (25/30 kW)
- 8,000 or 12,000 rpm high-torque BT50 motor spindle (25/45 kW)
- 4,000 rpm BT50 gear-driven spindle (22/26 or 30/37 kW)
- BRT CNC rotary table with 0.001° indexing and simultaneous four-axis machining
- Worktable with up to three oil, air or water circuits for automatic fixture clamping
- Thick T-slot worktable (7 slots, 18 mm wide, 125 mm spacing)
- 220 V AC electrical cabinet air conditioner
- 60-tool single-chain or 80/120-tool dual-chain magazine
- Heidenhain X/Y/Z linear scales for full closed-loop control
- In-zone Metrol drill-breakage detector
- Magazine-mounted breakage detector for long, slender tools
- Renishaw OMP60 or WP60M automatic workpiece probe
- Worktable washdown water gun and air blow gun options
- Through-spindle coolant with a 2 MPa or 7 MPa high-pressure unit
- Overhead spray coolant system with separate pump
- Elevating chip conveyor and chip cart (hinged-belt, scraper or magnetic scraper type)
- Mist collector with full enclosure option
- Tool life management system
- Automatic tool-damage recovery with pallet change and cycle restart
- G37 automatic tool length measurement
- ARTIS tool monitoring system
- Balluff tool identification system
- English-language controller manual
Виды станка
Отрасли применения
- Многостороннее фрезерование, растачивание, сверление, развертывание и нарезание резьбы за один установ.
ПРЯМОЙ КОНТАКТ С ОТДЕЛОМ ПРОДАЖ
Обсудить MDH100S с отделом продаж
Пришлите материал и чертеж детали, операции, точность, страну назначения и предпочтительную систему ЧПУ для подготовки предложения.






