Manual Lathe

CDS Manual Lathe

CDS is a manual lathe for general turning, maintenance and flexible small-batch work.

CDS-B/C shown

Maximum swing diameter over bed
Ø500 mm / Ø660 mm
Maximum workpiece length
1,000 / 1,500 / 2,000 / 3,000 mm
Spindle bore
Ø82 mm (CDS-B) / Ø105 mm (CDS-C)
Spindle speed range
26–2,000 r/min (CDS-B) / 26–1,700 r/min (CDS-C)
CDS-B/C machine view

Technical Specifications

SpecificationValue
Capacity & workpiece
Maximum swing diameter over bedØ500 mm / Ø660 mm
Maximum workpiece length1,000 / 1,500 / 2,000 / 3,000 mm
Chuck sizeØ250 mm / Ø315 mm
Travel & guideways
Bed guideway width394 mm
Maximum tool-post cross travel315 mm (500 mm swing) / 340 mm (660 mm swing)
Spindle
Spindle noseD8
Spindle boreØ82 mm (CDS-B) / Ø105 mm (CDS-C)
Spindle speed range26–2,000 r/min (CDS-B) / 26–1,700 r/min (CDS-C)

Equipment configuration

Standard Configuration

  • Standard three-jaw chuck (Ø250 mm for CDS6150B and CDS6250B, Ø315 mm for CDS6166B, CDS6266B and CDS-C variants)
  • Mechanical friction-plate clutch and foot brake
  • D8 spindle nose
  • Tool-post rapid traverse
  • 24 V work light and low-voltage control
  • Four-way tool post
  • Steady rest with cast-iron contacts on 1,500 mm and longer configurations
  • Follow rest on 1,500 mm and longer configurations
  • Leadscrew guard
  • Standard change gears
  • Standard tailstock
  • Standard tool kit
  • Left-hand carriage handwheel and twin-lever control
  • 7.5 kW Y-series main motor
  • Coolant system

Optional Configuration

  • Ø315 mm D8 four-jaw chuck for CDS6150B and CDS6250B
  • Ø400 mm D8 four-jaw chuck for CDS6166B, CDS6266B and CDS-C variants
  • Electromagnetic clutch and electromagnetic brake headstock
  • 5–12 mm hex keys and 110–130 mm wrench
  • Center sleeve, metric 90 to MT5 for CDS-B and metric 110 to MT5 for CDS-C
  • D115 fixed center and D415 live center
  • Ø30–200 mm steady rest and Ø20–110 mm follow rest for configurations shorter than 1,500 mm
  • Large-bore steady rest, Ø152.4–304.8 mm
  • Large-bore follow rest, Ø76.2–215.9 mm
  • Taper turning attachment
  • Ø250 mm drive plate and D8 faceplate
  • Thread dial indicator
  • Two- or three-axis digital readout
  • Large guard, tool-post guard, chuck guard or faceplate guard
  • Longitudinal carriage trip stop

Application Industries

  • General turning, maintenance and flexible small-batch work.

DIRECT SALES CONTACT

Discuss CDS with our sales team

Send your workpiece material, drawing, required operations, accuracy target, destination and preferred CNC system for a scoped quotation.