مركز تشغيل رأسي
VDM866H مركز تشغيل رأسي
VDM866H: تشغيل الصفائح والأقراص والهياكل والقوالب والمكونات الدقيقة.
- مقاس طاولة العمل (الطول×العرض)
- 1,000 × 500 mm
- مشوار المحاور X/Y/Z
- 820 / 600 / 600 mm
- أقصى سرعة للمغزل
- 12,000 r/min (direct-drive spindle)
- أقصى حمولة للطاولة
- 600 kg

المواصفات الفنية
| المواصفة | القيمة |
|---|---|
| مواصفات إضافية | |
| مقاس طاولة العمل (الطول×العرض) | 1,000 × 500 mm |
| أقصى حمولة للطاولة | 600 kg |
| مشوار المحاور X/Y/Z | 820 / 600 / 600 mm |
| أقصى سرعة للمغزل | 12,000 r/min (direct-drive spindle) |
| سعة مخزن الأدوات | 24 tools (arm-type changer) |
| نوع مجرى توجيه المحاور X/Y/Z | Linear roller guideways |
| قدرة محرك المغزل | 7.5 / 11 kW standard |
| مخروط المغزل | BT40 (No. 40, 7:24) |
تجهيزات الماكينة
التجهيز القياسي
- Mitsubishi M80B CNC control
- 24-tool magazine with arm-type automatic tool changer
- Rear chip discharge with two sloped sides and a rear coolant tank
- Integrated machine enclosure
- High-flow chip washdown for non-ferrous cutting
- Foundation installation accessories
- 12,000 rpm direct-drive BT40 spindle with 7.5/11 kW spindle motor
- Spindle oil cooling and spindle nose coolant ring
- Workpiece coolant system
- Linear roller guideways
- 48 m/min rapid traverse
- Automatic lubrication system
- Rigid tapping
- Work light and three-color status light
- Spindle air curtain and spindle taper air blast
- Tool kit, toolbox and supplied technical documentation
- USB and DNC functions, with RJ45 Ethernet port
- Front safety door interlock
- Handheld air blow gun for the worktable and workpiece
- Handheld control pendant
- Electrical cabinet heat exchanger
التجهيز الاختياري
- Worktable and workpiece washdown water gun
- Internal auger chip conveyor
- External elevating chip conveyor (hinged-belt or scraper type)
- Automatic front guard door
- 11/15 kW spindle motor
- 15,000 rpm direct-drive spindle
- Mist collector
- Fully enclosed guarding option
- Fourth-axis CNC rotary table, Ø120 / Ø170 / Ø200 mm (Ø30 / Ø35 / Ø35 mm through bores respectively)
- Fourth-axis CNC rotary table, Ø250 mm with Ø70 mm through bore and hydraulic brake (requires booster cylinder or hydraulic power unit)
- Mitsubishi M80A or Siemens 828D CNC control
- FANUC 0i-MF Plus (5) or (1) CNC control
- Linear scales for full closed-loop control
- Renishaw OMP60 or CP40M workpiece probe
- Renishaw TS27R or CT20D tool setter
- Metrol tool breakage detector
- 220 V AC electrical cabinet air conditioner
- Through-spindle coolant package for a direct-drive spindle (2 MPa or 5–7 MPa)
صور الماكينة
الصناعات التطبيقية
- تشغيل الصفائح والأقراص والهياكل والقوالب والمكونات الدقيقة.
اتصال مباشر بالمبيعات
ناقش VDM866H مع فريق المبيعات
أرسل مادة قطعة العمل والرسم والعمليات والدقة والوجهة ونظام CNC المفضل لإعداد عرض سعر محدد النطاق.







