مخرطة تقليدية
CWM مخرطة تقليدية
CWM: الخراطة العامة والصيانة والعمل المرن للدفعات الصغيرة.
الصورة للطراز CW-M
- أقصى قطر دوران فوق السرير
- Ø1,000 / Ø1,250 / Ø1,400 / Ø1,600 mm
- أقصى طول لقطعة الشغل
- 1,500 / 2,000 / 3,000 / 4,000 / 5,000 / 6,000 / 8,000 mm (8,000 mm on CW61 only)
- نطاق سرعة المغزل
- 3.15–315 r/min forward / 4.5–390 r/min reverse
- نوع مجرى التوجيه
- Hardened V-and-flat bed ways, 755 mm wide

المواصفات الفنية
| المواصفة | القيمة |
|---|---|
| مواصفات إضافية | |
| أقصى قطر دوران فوق السرير | Ø1,000 / Ø1,250 / Ø1,400 / Ø1,600 mm |
| أقصى طول لقطعة الشغل | 1,500 / 2,000 / 3,000 / 4,000 / 5,000 / 6,000 / 8,000 mm (8,000 mm on CW61 only) |
| أقصى طول خراطة | 1,300 / 1,800 / 2,800 / 3,800 / 4,800 / 5,800 / 7,800 mm (7,800 mm on CW61 only) |
| نوع مجرى التوجيه | Hardened V-and-flat bed ways, 755 mm wide |
| مقاس الظرف | Ø1,000 mm for 1,000 / 1,250 mm swing, Ø1,250 mm for 1,400 mm swing, Ø1,600 mm for 1,600 mm swing (four-jaw) |
| نطاق سرعة المغزل | 3.15–315 r/min forward / 4.5–390 r/min reverse |
| قدرة محرك المغزل | 22 kW standard / 30 kW special order |
| أقصى مشوار للمنزلق العلوي | 580 / 670 / 725 / 825 mm for 1,000 / 1,250 / 1,400 / 1,600 mm swing, respectively |
| مشوار جلبة الغراب المتحرك | 300 mm |
تجهيزات الماكينة
التجهيز القياسي
- Standard four-jaw chuck sized to the model (Ø1,000 / Ø1,250 / Ø1,600 mm)
- 22 kW main motor
- Manual tailstock with Ø160 mm fixed quill
- Standard tool kit
- Anchor bolts
- Steady rest on 3,000 mm and longer configurations
- Follow rest on 3,000 mm and longer configurations
التجهيز الاختياري
- Three-jaw or four-jaw chuck options
- Steady rest and follow rest for 1,500 / 2,000 mm workpiece lengths
- Heavy-duty large-bore steady rest
- Roller support (open steady rest)
- 30 kW main motor
- D116 fixed center
- MT6 or metric 80 D5180 live center for the standard tailstock
- Carriage, chuck or tool-post guard
- Motorized tailstock
- 8 t workpiece capacity package (low spindle speed at full load)
- 8 t workpiece capacity package with a three-jaw or four-jaw tailstock chuck (low spindle speed at full load)
- Cross-axis and longitudinal digital readouts
- Foundation leveling wedges sized to the machine length
- Metric or inch thread dial indicator
- Change gears for 11.5 or 19 TPI with a metric leadscrew
- Metric taper turning attachment
صور الماكينة
الصناعات التطبيقية
- الخراطة العامة والصيانة والعمل المرن للدفعات الصغيرة.
اتصال مباشر بالمبيعات
ناقش CWM مع فريق المبيعات
أرسل مادة قطعة العمل والرسم والعمليات والدقة والوجهة ونظام CNC المفضل لإعداد عرض سعر محدد النطاق.






